Bloody pox (and other spells, requiring precise targeting to be used)

While skill mechanic itself is fun, the implementation is… kinda awful? It requires a target, otherwise button press is simply ignored. If you press skill button and only hover enemy after that, nothing will happen. You have to hover your enemy first and only then can you use the skill itself. The best recipe for wrist pains, considering that spreading radius isn’t that large, so if enemies aren’t packed densily, you have to hover and click each one separately.
Please, make it have at least a small aoe, not requiring any targets to be cast and increase spreading range slightly.
Edit: Or make all these targeted spells to choose closest target in small radius near a cursor position, instead of requiring precise targeting, which is especially awful against smaller sized enemies.

3 Likes

I know it’s not an ideal fix, but binding skills like this to mouse scroll wheel makes it significantly easier to rapidly click without having to tap your finger a lot.

1 Like

I mean… That’s the case for literally every targeted ability though?

You have to click on individual targets for it to work. Only AoE’s can be cast on the ground if there isn’t an enemy being targeted.

As for QoL for the skill itself, increasing its spreading range would help, that way you have fewer stragglers just out of range of the spread that need to be directly targeted (Especially after that change a while back where it no longer persists on corpses, as that was often a means to mitigate this by having the stragglers run by a corpse and get afflicted)

Would also be nice if they tightened up the timer for being re-spread to. Currently if you have 2 targets that live through a single cast and then apply it again to one of them, the second one won’t be afflicted until very late into the duration (Sometimes not even then if you haven’t got enough bonus duration from Black Death)

Pox wont respread to same/already affected target, so as long as the first one is running it wont respread the second just because you refresh it on the first.
Spread interval is like, 0.6 secs or something, (ie faster than actual tick interval of 1sec), pretty sure changing that won’t alter the outcome because of the above “rule”/interaction ( i don’t remember if i tried setting it to 0.01 tho)

Well, then my best suggestion would be to make all these targeted spells to choose closest target in small radius near a cursor position, instead of requiring precise targeting, which is especially awful against smaller sized enemies.

if you feel like spoiling your mood/souring your coffee, take a look at Ill Omen :woozy_face:

1 Like

No need to abuse mouse wheel, when there is autohotkey that can do the same by pressing any button without wheel scrolling :slight_smile: That’s exactly what i’m doing for bloody pox right now, otherwise wouldn’t even bother with it’s current targeting.

That’s not what I’m talking about though.

What I’m talking about is:

  • You cast Pox on target A and it spreads to target B
  • This cast of Pox runs out on both targets
  • You recast Pox on target A
  • This brand new cast will not spread to target B because… Reasons?

This is a strange quirk where a completely new cast simply won’t spread to targets that have recently been affected by a completely different cast for no apparent reason, for at least several seconds.

When there shouldn’t be any reason why a new cast wouldn’t spread to a target that is not currently affected by Pox (And hasn’t been affected by this new cast)

because you cast it faster than 5.7 second impacting B, as that’s when target b was first hit, ie it still has pox registered “cd”/duration running left inside it
^this is also why changing the spread interval wont solve it, since you’re just changing that original hit/timing counter, and you will always be ahead of it from the first target if you cast it too soon/“immediately” after first expires, as the delay gets added on regardless. ie duration+x(spread interval), which is then the wait time, which will always result in downtime on main target or repeat cast to re-spread 2nd

or you’re out of range, or affected by the spread cap.

What part of “It runs out on BOTH” do you not understand?

Target B is not under the effects of ANY Pox. The entire first cast of Pox has completely expired.

Yet casting new Pox on A will have it not spread to B for several seconds (Sometimes that entire cast just simply won’t spread, depending on its duration in regards to Black Death extending it)

If there’s some internal CD for spreading, that is what needs to be tightened. Nothing about spread interval, something I have never once brought up.

Make it so that the delay for spreading is much shorter from when a cast expires. Making a target susceptible for a new cast to spread to them much sooner from when a prior cast has expired on them.

Like, if a target can be affected by a new direct cast, they should be able to be spread to by a new cast.

Not this silly internal cooldown that goes far beyond such a case.

Hardly. When we’re talking about a situation with 2 targets standing side-by-side (Such as a couple of heroes spawned from a shrine)

This particular delay for spreading causes a lot of excess casts as you have to manually cast onto every target because it simply won’t spread properly in scenarios where you have several heroes to fight (Such as shrines or those occasional groups of 3 heroes/bosses you encounter in the overworld)

i’m saying the internal cd is related to the spread interval so will always be there, it doesn’t matter if you lower it or increase it, it gets tacked on, so it will always come after…
That’s the part you’re missing, changing the delay just changes when it comes after, not it not coming after, it will always come after the first…

What part am I missing? Also, where is the spread interval involved?

Spread interval is 0.6s so there will always be a 0.6s delay after applying Pox before a second target is afflicted. This is fine. This is irrelevant to the situation.

The internal cooldown for being spread to, the thing I’m suggesting a change to, is much longer. Longer than even an overcapped Black Plague duration.

This cooldown prevents a target from having a Pox spread to them despite them not having a Pox currently active.

Like, yes, it makes sense to have it so Pox can’t spread to a target with a Pox active. Also, the thing where a singular cast cannot respread to an already affected target, that is also fine.

What the issue is here is the arbitrary way that the cooldown interacts with additional casts. Whereby a target cannot receive the spread from any future casts until this cooldown expires, which is far longer than the actual duration of the skill (Especially before extensions from Black Death)

Reducing this cooldown, doesn’t impact targets whom already have a Pox active (They are not targets for the spread anyway), doesn’t interact with a single cast (Targets still don’t get affected by the same cast more than once) but makes the spreading of future casts more consistent.

Ideally it’d be short enough whereby recasting on target A while target B still has 0.6s worth of duration left (As there is that small discrepancy due to the spread interval) would still spread to target B once its active Pox wears off (At the next tick of the spread interval)

Rather than target B being immune to all spreads for however many seconds the cooldown currently is. Which causes multi-target situations to require you to manually cast Pox on every target in order to maintain uptime because the spreading just flat out doesn’t work for every other cast due to the spread cooldown.

sry, i don’t know how to explain it better then, reducing the interval you think wont change that it will still come after/be delayed

you can mod the files yourself to test

Then change the thing that DOES affect the thing I want to be changed?

Seemingly there is SOMETHING in the code that is the cause of this interaction.

Thus, change whatever that something is to reduce the severity of this interaction. Ideally having it exactly align with the actual skills duration.

Like, I’m not a coder for the game. I shouldn’t have to specify the exact line of code that needs to be altered in order to make a suggestion.

From experience with it in game, I can point to it being something to do with how the spread functions, due to the fact that you can directly target something with the skill to apply it to them, meaning it’s not a blanket prevention of the skill entirely, but merely something to do with the spread.

Beyond that, whatever the specifics are, would be for whomever decides to address it to figure out.

Can I just ask, what is wrong with this skill? Half the time it just doesn’t activate and I thought a long time ago crate did something to make it better, but it still feels like ass

Omen unlike Pox has a radius trigger, so you can be 2meter distance from enemy with your cursor and still apply it. ie more casual/lenient to cast “qol” because radius
However, it can also be wasted in cast as a CD skill then, as you can cast it before it can respread (as per the above talks), still consuming the CD as a usual delaying your next recast (pox you can spam if you miss an interval/cast a second to early prior)

1 Like

Its simply a pain in the arse playing conjurer and having to press so many buttons… devouring swarm, bloody pox, wendigo totem, wind devil, blood of draig, frailty, sigil of consumption…
And now the placed the 2 mouseskills in the middle of the bar… wtf why not at the end of it.

you can switch from Orb hotbar to old “square”/horizontal health skill bar that put your mouse skills back.
That aside, you’re not forced to have all your buttons on the same hotbar, perma pets like devils you can put on hotbar 2 and only switch to summon as necessary on start/death resurrect (nor are you forced to taking “all” da skills ofc" :sweat_smile:)